C-Series Conveyor

Light-Duty Incline Conveyor

The design of the C-Series belt conveyors makes them especially suited for steep excavation work. This conveyor is one of the most popular material handling conveyors we construct for several reasons. First, let’s look at the design. The C-Series belt has a narrow bed design. Made for a 10 inch belt, this conveyor fits into small, narrow openings. This makes it ideal for basement excavation and clean-out. If small spaces are an issue, this belt is perfect for you.

The belt is durably made and is equipped with two-inch tall rubber bucket type cleats. Frame construction consists of either 7/8 inch or 1-1/4 inch steel tubing. This makes the belt very strong and durable. Even though the equipment can handle heavy loads, it still is easy to handle. In fact, the shorter length 7/8 inch conveyor (26 feet and shorter) itself can be moved around easily by two or three men.

The bed of the conveyor is a 10 inch slider style and has standard 2 inch high sides. However, optional bed covers may be ordered to increase its usability. The BC3 cover comes in three foot lengths and has a 4 inch height clearance. The BC5 has the same height clearance but is made in five foot section. Both are made of formed steel and can be easily removed when not needed.

Read More
C-Series Dirt Belt Conveyor
C-Series Dirt Conveyor
C-Series Dirt Conveyor
C-Series Dirt Conveyor

Standard Specifications

Conveyor Frame

Standard Specifications

  • Bed– 10″ wide slider bed x 2″ high side wall.
  • Frame– 7/8″ or 1-1/4″ steel tubing material.
  • Belt– 10″ wide, 2 ply 150 black roughtop x bare.
  • Motor Electric, gas, or hydraulic motor available (see options).
  • End Drive– V-belt, or gearbox drive.
  • Cleats– 2″ tall rubber bucket cup, bolted on 20″ centers.
  • Bearings– Sealed, pre-lubricated, self-aligning, ball bearings.
  • Drive pulley– 7″ in diameter. Open caged for self cleaning.
  • Tail Pulley– 6″ in diameter. Open caged for self cleaning.

Conveyor Lengths and Weights

CONVEYOR MODEL OVERALL LENTH TOTAL BELT LENGTH FRAME MATERIAL OD WEIGHT (LBS.)
C-3-16 16 feet 31′-6″ 7/8″ 275
C-3-21 21 feet 41′-6″ 7/8″ 330
C-3-26 26 feet 51′-6″ 7/8″ 375
C-2-31 31 feet 71′-6″ 1-1/4″ 515
C-2-42 42 feet 83′-6″ 1-1/4″ 575

Custom sizes available | Request a quote | Weights do not include motor or optional equipment.

Optional Equipment

C96 Hopper

  • 4 cubic foot capacity
  • 4 bolt attachment to conveyor

N97 Hopper

  • 1.5 cubic yard capacity
  • Free standing, adjustable support legs
  • Adjustable Gate for flow control.

C-Series Undercarriage

Hand-pump undercarriage
  • Manual hand pump for boom lift
  • Heavy-duty frame for towing
  • Pintel ring or 2-5/16″ ball hitch
Hydraulic power undercarriage
  • Gas or Electric power supply
  • Hydraulic pump
  • Hydraulic boom lift valve
  • Hydraulic Belt operation valve
  • Heavy-duty frame for towing
  • Pintel ring or 2-5/16″ ball hitch

C106 Dolly and Hitch

  • 2-pin dolly axel attachment
  • 2-pin hitch attachment

Electric Motor

Gas Engine

Honda Gas Engine

Hydraulic Motor

Pneumatic Motor

C-Series Belt Covers

BC3 Cover
  • 3′ removable sections
  • 4″ height clearance
  • Formed Steel
BC5 Cover
  • 5′ removable sections
  • 4″ height clearance
  • Formed Steel

Electric Controls

110/220v Single Phase
  • On/off switch
  • Foward/Neutral/Reversing switch
220/440v 3 phase
  • VFD Variable Speed Controller
  • Other available upon request

Hydraulic Controls

  • Varible Speed
  • Forward/Neutral/Reversing
  • Emergency shutoff at discharge
  • Spool valves for additional functions

Special Options

  • Scrappers/Wipers
  • Support legs
  • Discharge chutes
  • Drip pan
  • Elephant trunks
  • Custom undercarriages
  • Custom widths
Optional equipement is consider to be additions to the conveyor, and are priced separately