D-Series Conveyor

Horizontal Conveyor

The D-Series line of material handing conveyors are second cousins to the SD-Series. The D-Series is used when you need to move your material along a horizontal plane. If you need to get stuff from point A to point B, the D-Series may be just the ticket.

The bed of this conveyor belt is constructed with a 15 degree trough configuration. This is designed to prevent material from rolling off the belt during transit. The belt is supported by a center roller for additional strength. Bed widths are built in 16, 10, and 24 inch dimensions so that you can match the conveyor to your material throughput requirements. The bearings on the belt pulleys are sealed and pr-lubricated.

The belt itself is constructed of a black 150 rubber belt and is available with either a smooth or rough surface texture. Choose the belt surface to match your needs. Besides dry materials like dirt, sand, and gravel, the D-Series can also move wet material. Mud, sludge, and sometimes wet cement can be transported on these conveyor belts.

Read More
SD-Series Belt Conveyor
D-Series Belt Conveyor
D-Series Belt Conveyor
D-Series Belt Conveyor

Standard Specifications

Frame

Conveyor Belts

Standard Specifications

  • Bed – 16, 20, or 24 inch wide 15 degree trough, center rollar.
  • Frame – 7/8 inch or 1-1/4 inch steel tubing, powder painted.
  • Belt – 2 ply 150 black rubber x bare
  • Motor – Electric, gas, or hydraulic motor available.
  • End Drive – V-belt, or gearbox drive.
  • Cleats – 1-1/2 inch tall chevron cleat on 24 inch centers.
  • Bearings – Sealed, pre-lubricated, self-aligning, ball bearings.
  • Drive pulley – 7 inch diameter. Open caged for self cleaning.
  • Tail Pulley – 6 inch diameter. Open caged for self cleaning.

Conveyor Lengths and Weights

Conveyor Model Overall Length Total Belt Length Frame Material OD Weight (lbs.)
D-3-16 16 feet 31′-6″ 7/8″ 325
D-3-21 21 feet 41′-6″ 7/8″ 375
D-2-26 26 feet 51′-6″ 7/8″ 415
D-2-31 31 feet 61′-6″ 1-1/4″ 515
D-2-36 36 feet 71′-6″ 1-1/4″ 575
D-2-42 42 feet 41′-6″ 1-1/4″ 615
D-2-52 52 feet 101′-6″ 1-1/4″ 750

Custom sizes available | Request a quote | Weights do not include motor or optional equipment.

Frame Dimensions

Optional Equipment

D96 Hopper

  • 4 cubic foot capacity
  • 4 bolt attachment to conveyor

N97 Hopper

  • 1.5 cubic yard capacity
  • Free standing, adjustable support legs
  • Adjustable Gate for flow control.

D-Series Undercarriage

Hand-pump undercarriage
  • Manual hand pump for boom lift
  • Heavy-duty frame for towing
  • Pintel ring or 2-5/16″ ball hitch
Hydraulic power undercarriage
  • Gas or Electric power supply
  • Hydraulic pump
  • Hydraulic boom lift valve
  • Hydraulic Belt operation valve
  • Heavy-duty frame for towing
  • Pintel ring or 2-5/16″ ball hitch

D106 Dolly and Hitch

  • 2-pin dolly axel attachment
  • 2-pin hitch attachment

Electric Motor

Gas Engine

Honda Gas Engine

Hydraulic Motor

Pneumatic Motor

SD-Series Belt Covers

BC316 Cover
  • 3′ removable sections
  • 4″ height clearance
  • Formed Steel
BC516 Cover
  • 5′ removable sections
  • 4″ height clearance
  • Formed Steel

Electric Controls

110/220v Single Phase
  • On/off switch
  • Foward/Neutral/Reversing switch
220/440v 3 phase
  • VFD Variable Speed Controller
  • Other available upon request

Hydraulic Controls

  • Varible Speed
  • Forward/Neutral/Reversing
  • Emergency shutoff at discharge
  • Spool valves for additional functions

Special Options

  • Scrappers/Wipers
  • Support legs
  • Discharge chutes
  • Drip pan
  • Elephant trunks
  • Custom undercarriages
  • Custom widths
Optional equipement is consider to be additions to the conveyor, and are priced separately